2200mm Full-Automatic 5-Ply Corrugated Cardboard Production Line – High-Speed Box Making Machine

Product Description

2200mm Corrugated Paper Board Production Line 5 Ply Corrugated Box Making Machine

Product Description

Product description of corrugated board prodction line

According to the corrugated board production process, the corrugated board production line is composed of two relatively independent process sections, wet end equipment and dry end equipment. The wet end equipment mainly includes base paper trays, automatic paper splicing machines, preheater, and single facer machine, paper conveyor bridges, glue spreaders, double facer machines, etc., wet end equipment will make corrugated base paper into three, five, and seven-layer corrugated cardboard with different flute combinations; dry end equipment mainly includes rotary cutting machines, slitting and creasing machines , Cross-cutting machine, stacking machine, etc., the  equipment will slit the corrugated cardboard according to the order requirements for slitting, cross-cutting and stacking.

Product Parameters

Product parameters of corrugated board production line

1	Effective width	2200mm	2		Design produce speed	180m/min
3	Three layer work	110-160m/min	4		Five layer work speed	90-140m/min
5	Seven layer work speed	-------------------	6		Maximum order change  speed	100m/min
7	Slitting accuracy	±1mm	8		NC cutting accuracy	±1mm
Remarks	The above speed indicators must meet: the production width is 2200mm, meet the following paper standards and ensure that the surface temperature of the heated parts of the equipment is 175ºC.
9	Flute combination
10	Steam requirement	The maximum pressure 16kg/cm2		Common pressure10-12kg/cm2			use4000kg/Hr
11	Electricity demand	AC380V 50Hz 3PH		Installed capacity≈300KW			Power ≈220KW
12	Compressed air	The maximum pressure8kg/cm2		Common pressure5-7kg/cm2			use1m³/min
13	space	≈Lmin75m*Wmin12m*Hmin5m(The actual drawing to provider to provide audited prevail)

Product Details

Product details of single facer machine

★ It adopts a hood suction structure and is equipped with a high-pressure and powerful fan. The air source and electric control are concentrated in the same operation cabinet, and the operation side is fully enclosed and fully covered.
★ High-quality resin sand casting, wallboard thickness 200mm. It adopts independent gearbox and universal joint transmission structure.
★ A hoisting trolley is installed on the conveying flyover, which can be used to take out the tile roller assembly and pressure roller when needed, which is convenient and quick.
★ The gluing roller unit adopts an overall outward-moving structure, which can be moved out of the machine as a whole for maintenance during maintenance, which improves work efficiency.
★ It is equipped with a spray humidity control device to keep the corrugated shape with good deformation stability and avoid dry cracking.
★ Using an automatic circulating glue supply system and a double-cylinder pneumatic gluing device, which has a good cushioning effect.
★ The gluing department adopts an integral sliding board structure, and the surface of the gluing roller is finely ground and engraved with pits and hard chrome plated.
★ The material of the corrugated roller is 50CrMo alloy steel, the diameter of the main corrugated roller is ¢346mm, after quenching and tempering→rough turning→inner hole fine boring→shaft head drying→welding→tempering to stress-relief→finishing turning→rough grinding→intermediate frequency quenching→precision grinding with CNC grinder →Tungsten carbide treatment.
★ The main power is driven by a variable frequency motor, which is energy-saving and efficient, and has a low failure rate.
★ The width of the glue is adjusted by electric motor to adapt to the change of the width of the base paper used.

Product description of mill roll stand

★ Using full hydraulic drive to complete the base paper clamping, loosening, moving centering, left and right translation, etc., the base paper lifting is driven by hydraulic pressure.
★ The brake adopts a multi-point brake system, a gear plate structure, a cooling fan, and Airtac pneumatic components, which ensure stable tension and long life.
★ Large-diameter spindle design, stable swing arm sliding, high-frequency processing inlaid steel guide rail, super wear-resistant,
★ Hydraulic cylinder twisted shaft type installation, does not bear radial force, easy to maintain.

Rino is a fast growing group company mainly committed to manufacturing and exporting high quality products with reasonable price to fulfill the needs of the most rigorous buyers. With the development of 20 years ,Rino Group already established flexo printing machine plant ,manual die cutting machine plant ,corrugated production line plant in Hebei province , carton packaging plant and trade department in Jinan Shandong province, Oversea branch in Chennai India.

Our company has nearly 20 years of experience in carton packaging production and professional technical team which can provide reasonable packaging solutions, after-sales service, timely and comprehensive for each customer. Aiming at offering the most suitable solution and professional service, Persisting in client requirement oriented, offering high quality, reasonable price and cordial service which have formed a unique service mode.
We sincerely expecting for cooperation with all global clients on the basis of Mutual-Trust, Mutual-Understanding, and Mutual-Benefit.

 

Certifications

 

exhibition

 

Packaging & Shipping

FAQ

1.Q:What is the machine warranty?
A:one year.
2.Q:Does your machine with CE certificate?
A:Yes, issued by Italian organization
3.Q:What is the production time while placing order?
A:About 40 days
4.Q:What is the delivery time?
A:45-60days after get the payment.
5.Q:Can your company handle shipping for customers?
A:Yes, just give us destination sea port or container yard
6.Q:Does the packing strong?
A:Yes, all packages are double-checking before delivery
7.Q:How about after-sales service process?
A: We offer life time A.S.S. Please feel free to contact after-sales department.
8.Q:Do you have machines in stock?
A: for standard model, we have a large quantity in stock. For special model, we need 20-30 days to produce it for you.
9.Q:Do you inspect machines before packing?
A:Of course we do.we have QC department to debug the machine before packing
10.Q:What's the payment term?
A:T/T 30% in advance, the balance paid before delivery. 
11. Q: Do you accept factory visiting?
A:We are highly greeting for your visiting.